Toyota 4Runner: Rear Differential Lock Position Switch

Toyota 4Runner Service Manual / Drivetrain / Axle And Differential / Rear Differential Lock Position Switch

Components

COMPONENTS

ILLUSTRATION

Inspection

INSPECTION

PROCEDURE

1. INSPECT REAR DIFFERENTIAL LOCK POSITION SWITCH

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Switch Condition	Specified Condition
1 (GND) - 2 (+B)	Pushed	Below 1 Ω
1 (GND) - 2 (+B)	Released	100 kΩ or higher

Text in Illustration

Component without harness connected

(Rear Differential Lock Position Switch)

Pushed

Released

If the result is not as specified, replace the rear differential lock position switch.

Removal

REMOVAL

PROCEDURE

1. REMOVE REAR DIFFERENTIAL LOCK POSITION SWITCH

(a) Remove the rear differential lock position switch (See page ).

Installation

INSTALLATION

PROCEDURE

1. INSTALL REAR DIFFERENTIAL LOCK POSITION SWITCH

(a) Install the rear differential lock position switch (See page ).

Rear Differential Lock Control Switch

Components COMPONENTS ILLUSTRATION Inspection INSPECTION PROCEDURE 1. INSPECT DIFFERENTIAL LOCK SWITCH (a) Measure the resistance according to the value(s) in the table below. Standard ...

Steering Knuckle(for 2wd)

Components COMPONENTS ILLUSTRATION ILLUSTRATION Removal REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is ...

Other materials about Toyota 4Runner:

Downhill Assist Control Switch
Components COMPONENTS ILLUSTRATION Removal REMOVAL PROCEDURE 1. REMOVE DRIVE MONITOR SWITCH 2. REMOVE MAP LIGHT ASSEMBLY 3. REMOVE DOWNHILL ASSIST CONTROL SWITCH (a) Disconnect the 2 connectors. ...

Shifting between H4 and L4
Shifting from H4 to L4 Stop the vehicle completely and continue to depress the brake pedal. Shift the shift lever to N. Type A Shift the front-wheel drive control lever to L4. Type B Push the “UNLOCK” button and then push and turn the front ...