Toyota 4Runner manuals

Toyota 4Runner: Rear No. 1 Seat Assembly(for 60/40 Split Slide Walk-in Seat Type Lh Side)

Toyota 4Runner Service Manual / Vehicle Interior / Seat / Rear No. 1 Seat Assembly(for 60/40 Split Slide Walk-in Seat Type Lh Side)

Components

COMPONENTS

ILLUSTRATION


ILLUSTRATION


ILLUSTRATION


ILLUSTRATION


ILLUSTRATION


ILLUSTRATION


Removal

REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE

1. REMOVE REAR SEAT HEADREST ASSEMBLY

(a) Remove the headrest.

2. REMOVE REAR SEAT TRACK INNER BRACKET COVER


(a) Using a moulding remover, detach the 2 claws and guide, and then remove the cover.

3. REMOVE REAR SEAT TRACK OUTER BRACKET COVER


(a) Using a moulding remover, detach the 2 claws.

(b) Move the cover in the direction of the arrow to detach the 2 guides, and then remove the cover.

4. REMOVE SEAT TRACK INNER BRACKET COVER LH


(a) Using a clip remover, detach the 6 clips and remove the cover.

5. REMOVE REAR SEAT TRACK COVER LH


(a) Using a clip remover, detach the 3 clips and remove the cover.

6. REMOVE REAR SEAT ASSEMBLY LH


(a) Disconnect the center inner seat belt from the seat.

(b) Remove the 5 bolts, nut and seat.

NOTICE:

Be careful not to damage the vehicle body.

HINT:

Be sure to remove the seat with the seatback folded down.

Installation

INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE

1. INSTALL REAR SEAT ASSEMBLY LH


(a) Place the seat in the cabin.

NOTICE:

Be careful not to damage the vehicle body.

HINT:

Be sure to install the seat with the seatback folded down.

(b) Connect the center inner belt to the seat.

(c) Temporarily install the seat with the 5 bolts and nut.

(d) Tighten the bolts and nut in the order indicated in the illustration.

Torque:

37 N·m {377 kgf·cm, 27 ft·lbf}

2. INSTALL REAR SEAT TRACK COVER LH


(a) Attach the 3 clips to install the cover.

3. INSTALL SEAT TRACK INNER BRACKET COVER LH


(a) Attach the 6 clips to install the cover.

4. INSTALL REAR SEAT TRACK OUTER BRACKET COVER


(a) Move the cover in the direction of the arrow to attach the 2 guides.

(b) Attach the 2 claws to install the cover.

5. INSTALL REAR SEAT TRACK INNER BRACKET COVER


(a) Attach the 2 claws and guide to install the cover.

6. INSTALL REAR SEAT HEADREST ASSEMBLY

(a) Install the headrest.

Installation
INSTALLATION CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. HINT: A bolt without a torque specification is shown in the standard bolt cha ...

Rear No. 1 Seat Assembly(for 60/40 Split Slide Walk-in Seat Type Rh Side)
...

Other materials about Toyota 4Runner:

System Description
SYSTEM DESCRIPTION 1. FRONT POWER SEAT CONTROL SYSTEM DESCRIPTION The driver seat is equipped with slide, reclining, lifter, front vertical and lumbar support adjustment functions. The passenger seat is equipped with slide and reclining adjust ...

Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART Front Power Seat Control System DTC Code Detection Item See page B2650 Slide Sensor Malfunction B2651 Reclining Sensor Malfunc ...

© 2016-2024 | www.to4runner.net

0.0114