Toyota 4Runner manuals

Toyota 4Runner: Rear Speed Sensor RH Performance (C1411,C1412)

DESCRIPTION

Refer to DTCs C1401 and C1402 (See page ).


DTC Code

DTC Detection Condition

Trouble Area

C1411

C1412

One of the following conditions is met:

  1. When the vehicle is driven in reverse at a speed of 3 km/h (2 mph) or more and 3 of the wheel sensors detect the reverse signal, the other sensor detects a high frequency pulse 75 times while the ignition switch is ON.
  2. At a vehicle speed of 10 km/h (6 mph) or more, the vehicle speed sensor output drops by 50% for 5 seconds.
  3. The lowest wheel speed is 10 km/h (6 mph) or more and the difference between the highest and lowest wheel speed values is 2 km/h (1 mph) or less for 15 seconds.
  4. At a vehicle speed of 30 km/h (19 mph) or more, one wheel direction is different from the other 3 wheels for 1 second.
  5. At a vehicle speed of 100 km/h (62 mph), a reverse signal is output for 1 second or more.
  6. At a vehicle speed of 30 km/h (19 mph) or more, the rotation direction of the one of the wheels is not detected normally and the rotation direction of the other 3 wheels is not the same for 1 second.

Rear speed sensor RH/LH

HINT:

  • DTC C1411 is for the rear speed sensor RH.
  • DTC C1412 is for the rear speed sensor LH.

CAUTION / NOTICE / HINT

NOTICE:

Check the speed sensor signal after replacement (See page ).


PROCEDURE

1.

REPLACE REAR SPEED SENSOR

(a) Replace the rear speed sensor (See page
).


NEXT

END

Front Speed Sensor RH Performance (C1409,C1410)
DESCRIPTION Refer to DTCs C1401 and C1402 (See page ). DTC Code DTC Detection Condition Trouble Area C1409 C1410 One of the following ...

Front Speed Sensor RH Output Malfunction (C1413,C1275,C1276,C1414)
DESCRIPTION Refer to DTCs C1401 and C1402 (See page ). DTC Code DTC Detection Condition Trouble Area C1413 C1414 One of the following ...

Other materials about Toyota 4Runner:

Customize Parameters
CUSTOMIZE PARAMETERS 1. CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE) NOTICE: When the customer requests a change in a function, first make sure that the function can be customized. Record the current settings before customizing. ( ...

Customize Parameters
CUSTOMIZE PARAMETERS 1. POWER DOOR LOCK CONTROL SYSTEM (See page ) 2. WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Smart Key System) (See page ) 3. WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Smart Key System) (See page ) 4. SMART KEY SYSTEM (for Entry Function) ...

© 2016-2024 | www.to4runner.net

0.018