Toyota 4Runner manuals

Toyota 4Runner: Rear window wiper and washer

Before operating the rear window wiper and washer switch, make sure the back window is completely closed.  The wiper operation is selected by moving the lever as follows:

Type A


1. Intermittent window wiper operation 2. Normal window wiper operation 3. Washer/wiper dual operation 4. Washer/wiper dual operation

The wiper will automatically operate a couple of times after the washer squirts.

(After operating several times, the wiper operates one more time after a short delay to prevent dripping.)

Type B


1. Intermittent window wiper operation 2. Normal window wiper operation 3. Washer/wiper dual operation 4. Washer/wiper dual operation

The wiper will automatically operate a couple of times after the washer squirts.

(After operating several times, the wiper operates one more time after a short delay to prevent dripping.)

The rear window wiper and washer can be operated when

• Vehicles without a smart key system: The engine switch is in the “ON” position.

Vehicles with a smart key system: The “ENGINE START STOP” switch is in IGNITION ON mode.


• The back window is completely closed.

Intermittent window wiper operation

• When intermittent window wiper operation mode is selected, the wiper will operate a couple of times and then switch to intermittent operation.

• During intermittent operation, the wiper stops temporarily at the reversing position.

When the rear window wiper and washer switch is turned off

The rear wiper will stop operation, and return to the retracted position after approximately 3 seconds.

However, if the engine switch is turned to the “ACC” or “LOCK” position (vehicles without a smart key system) or the “ENGINE START STOP” switch is turned to ACCESSORY mode or turned off (vehicles with a smart key system) while the rear wiper is operating, the rear wiper will stop at that position and will not return to the retracted position.

If no washer fluid sprays

Check that the washer nozzle is not blocked if there is washer fluid in the washer fluid reservoir.

Customization that can be configured at Toyota dealer

Settings (e.g. drip prevention function) can be changed.

(Customizable features )

NOTICE

When the rear window is dry

Do not use the wiper, as it may damage the rear window.

When the washer fluid tank is empty

Do not operate the switch continually as the washer fluid pump may overheat.

When a nozzle becomes blocked

Do not try to clear it with a pin or other object. The nozzle will be damaged.

Windshield wipers and washer
When intermittent windshield wiper operation is selected, the wiper interval can be adjusted. The wiper operation is selected by moving the lever as follows. Type A 1. Intermittent windshield ...

Using other driving systems
...

Other materials about Toyota 4Runner:

Registration
REGISTRATION PROCEDURE 1. REGISTER TRANSMITTER CODE HINT: The vehicle garage door opener records transmitter codes for systems such as garage doors, gates, entry gates, door locks, home lighting systems, security systems or other transmitte ...

Headlight Relay Circuit
DESCRIPTION The main body ECU receives headlight dimmer switch information signals, and illuminates the low beam headlight. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses and bulbs for circuits related to this system before performin ...

© 2016-2024 | www.to4runner.net

0.0076