REASSEMBLY
CAUTION / NOTICE / HINT
NOTICE:
When installing the hood bulge protector, heat the hood bulge surface using a heat light.
Standard:
Item |
Temperature |
---|---|
Hood Bulge |
20 to 30°C (68 to 86°F) |
NOTICE:
Do not heat the hood bulge excessively.
PROCEDURE
1. INSTALL HOOD SUPPORT ASSEMBLY LH
2. INSTALL HOOD SUPPORT ASSEMBLY RH
HINT:
Use the same procedure for the LH side and RH side.
3. CONNECT WASHER HOSE ASSEMBLY
(a) Attach the 5 clamps to connect the washer hose assembly. |
|
4. INSTALL WASHER NOZZLE SUB-ASSEMBLY
5. INSPECT WASHER NOZZLE SUB-ASSEMBLY
6. ADJUST WASHER NOZZLE SUB-ASSEMBLY
7. INSTALL NO. 3 HOOD BULGE PROTECTOR (w/ Hood Bulge)
(a) When using a new hood bulge:
(1) Clean the hood bulge surface.
(2) Using a heat light, heat the hood bulge surface.
(b) When reusing the hood bulge:
(1) Using a heat light, heat the hood bulge surface.
(2) Remove the double-sided tape from the hood bulge.
(3) Wipe off any tape adhesive residue with cleaner.
(c) Install a new No. 3 hood bulge protector as shown in the illustration. Text in Illustration
|
|
8. INSTALL NO. 2 HOOD BULGE PROTECTOR (w/ Hood Bulge)
(a) When using a new hood bulge:
(1) Clean the hood bulge surface.
(2) Using a heat light, heat the hood bulge surface.
(b) When reusing the hood bulge:
(1) Using a heat light, heat the hood bulge surface.
(2) Remove the double-sided tape from the hood bulge.
(3) Wipe off any tape adhesive residue with cleaner.
(c) Install 2 new No. 2 hood bulge protectors as shown in the illustration. Text in Illustration
|
|
9. INSTALL NO. 1 HOOD BULGE PROTECTOR (w/ Hood Bulge)
(a) When using a new hood bulge:
(1) Clean the hood bulge surface.
(2) Using a heat light, heat the hood bulge surface.
(b) When reusing the hood bulge:
(1) Using a heat light, heat the hood bulge surface.
(2) Remove the double-sided tape from the hood bulge.
(3) Wipe off any tape adhesive residue with cleaner.
(c) Install 2 new No. 1 hood bulge protectors as shown in the illustration. Standard:
|
|
10. INSTALL HOOD AIR INTAKE GUIDE (w/ Hood Bulge)
(a) Attach the 4 claws to install the hood air intake guide to the hood bulge. |
|
11. INSTALL HOOD BULGE (w/ Hood Bulge)
(a) Attach the 2 guides to install the hood bulge together with the hood air intake guide as shown in the illustration. |
|
(b) Attach the 3 clips. |
|
(c) Install the 4 nuts. |
|
12. INSTALL HOOD INSULATOR
(a) Attach the 2 claws. |
|
(b) Install the hood insulator with the 10 clips.
13. INSTALL HOOD TO RADIATOR SUPPORT SEAL
(a) Attach the 7 clips to install the hood to radiator support seal. |
|
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms. If multiple
suspected areas are listed, the potential causes of the symptoms are listed in order
of probability in the "Suspected Area" column of ...
Satellite Radio Broadcast cannot be Received
CAUTION / NOTICE / HINT
NOTICE:
Some satellite radio broadcasts require payment. A contract must be
made between a satellite radio company and the user. If the contract expires,
it will not be possible to listen to the broadcast.
After re ...