Toyota 4Runner: Reassembly
REASSEMBLY
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
PROCEDURE
1. INSTALL FLOOR SIDE SILL STAY
(a) Install the floor side sill stay with the 6 bolts.
.png)
2. INSTALL SIDE AUTO STEP MOTOR ASSEMBLY
|
(a) Install the bolt. Torque: 24 N·m {245 kgf·cm, 18 ft·lbf} |
|
.png)
(b) Using a 6 mm hexagon wrench, install the 3 hexagon bolts and side auto step motor assembly.
Torque:
12 N·m {122 kgf·cm, 9 ft·lbf}
|
(c) Engage the 4 clamps. |
|
.png)
3. INSTALL STEP PLATE COVER LH
(a) Install a new step plate cover LH with the 2 screws.
4. INSTALL STEP PLATE COVER RH
HINT:
Use the same procedure as described for the step plate cover LH.
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
1. INSTALL POWER LIFT STEP AS ...
Other materials about Toyota 4Runner:
Security Horn Circuit
DESCRIPTION
When the theft deterrent system is in the alarm sounding state, the main body
ECU outputs a signal repeatedly at 0.4 second intervals, causing the security horn
assembly to sound
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
Inspect the ...
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
A bolt without a torque specification is shown in the standard bolt chart (See
page ).
PROCEDURE
1. INSTALL AIR CONDITIONER AMPLIFIER ASSEMBLY
(a) Attach the 2 claws to install the air conditioning amplifier ...
0.0064