REASSEMBLY
PROCEDURE
1. INSTALL FOG LIGHT COVER LH
(a) Attach the 5 claws to install the fog light cover LH.
(b) Install the outside moulding retainer.
2. INSTALL FOG LIGHT COVER RH
HINT:
Use the same procedure as for the LH side.
3. INSTALL FOG LIGHT ASSEMBLY LH
4. INSTALL FOG LIGHT ASSEMBLY RH
HINT:
Use the same procedure as for the LH side.
5. INSTALL FRONT BUMPER REINFORCEMENT STOPPER RH (for RH Side)
(a) Attach the guide and 2 claws to install the front bumper reinforcement stopper RH.
6. INSTALL LOWER NO. 1 RADIATOR GRILLE
(a) Attach the 13 claws to install the lower No. 1 radiator grille.
(b) Install the clip.
7. INSTALL LOWER FRONT VALANCE PANEL (w/ Garnish)
(a) Install the lower front valance panel with the 13 outside moulding retainers.
8. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (w/ License Plate Bracket)
(a) Install the front bumper extension mounting bracket with the 2 screws.
9. INSTALL RADIATOR GRILLE
ABS Warning Light does not Come ON
DESCRIPTION
Refer to ABS Warning Light Remains ON (See page
).
WIRING DIAGRAM
Refer to ABS Warning Light Remains ON (See page
).
CAUTION / NOTICE / HINT
NOTICE:
When replacing the master cylinder solenoid, perform calibration (See page
).
PROCEDUR ...
Open / Short in Steering Lock ECU (B2781)
DESCRIPTION
The steering lock ECU and steering lock actuator assembly are supplied as a unit.
The steering lock ECU detects the steering lock position through the signals
from the lock and unlock position sensors.
The steering lock ECU activates the steer ...