REASSEMBLY
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. INSTALL OUTER MIRROR LIGHT ASSEMBLY BULB (w/ Side Turn Signal Light)
(a) Install the outer mirror light assembly bulb.
2. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY LH (w/ Side Turn Signal Light)
3. INSTALL OUTER MIRROR COVER LH
(a) Attach the 7 claws to install the outer mirror cover LH.
4. INSTALL OUTER MIRROR HOLE COVER LH
(a) Attach the 5 claws to install the outer mirror hole cover LH.
5. INSTALL OUTER MIRROR LH
(a) Connect the connector.
(b) Attach the 4 claws to install the outer mirror LH.
Front Wiper Rubber
Components
COMPONENTS
ILLUSTRATION
Replacement
REPLACEMENT
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
1. REMOVE FRONT WIPER BLADE
(a) ...
Voice Recognition Microphone Disconnected (B1579)
DESCRIPTION
The radio and display receiver assembly and map light assembly (telephone microphone
assembly) are connected to each other using the microphone connection detection
signal lines.
This DTC is stored when a microphone connection detection signa ...