REASSEMBLY
PROCEDURE
1. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)
2. INSTALL AUTOMATIC LIGHT CONTROL SENSOR
3. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY
4. INSTALL NO. 2 INSTRUMENT PANEL WIRE
(a) Attach the 17 clamps to install the No. 2 instrument panel wire.
(b) Connect the connector.
5. INSTALL TELLTALE LIGHT ASSEMBLY
6. INSTALL ACCESSORY METER ASSEMBLY
7. INSTALL DEFROSTER NOZZLE ASSEMBLY
(a) Install the defroster nozzle assembly with the 3 screws.
8. INSTALL NO. 3 HEATER TO REGISTER DUCT
(a) Attach the claw.
(b) Install the No. 3 heater to register duct with the 2 screws.
9. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT
(a) Attach the 2 claws.
(b) Install the No. 2 side defroster nozzle duct with the screw.
10. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT
(a) Attach the 2 claws.
(b) Install the No. 1 side defroster nozzle duct with the screw.
11. INSTALL NO. 2 HEATER TO REGISTER DUCT
(a) Install the No. 2 heater to register duct with the 4 screws.
12. INSTALL NO. 1 HEATER TO REGISTER DUCT
(a) Install the No. 1 heater to register duct with the 4 screws.
Removal
REMOVAL
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
1. REMOVE FRONT WHEEL
2. REMOVE DISC BRAKE CYLINDER ASSEMBLY LH
3. REMOVE FRONT DISC
...
Front Airbag Sensor LH Malfunction (B1615/14)
DESCRIPTION
The front airbag sensor LH consists of the diagnostic circuit and frontal deceleration
sensor, etc.
If the center airbag sensor receives signals from the frontal deceleration sensor,
it determines whether the SRS should be activated.
DTC B16 ...