Toyota 4Runner: Reassembly

Toyota 4Runner Service Manual / Brake / Brake System (other) / Brake Pedal(for Hydraulic Brake Booster) / Reassembly

REASSEMBLY

PROCEDURE

1. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER

(a) Install a new stop light switch mounting adjuster to the brake pedal support.

2. INSTALL BRAKE PEDAL PAD

(a) Install the brake pedal pad to the brake pedal.

Adjustment

ADJUSTMENT PROCEDURE 1. CHECK BRAKE PEDAL HEIGHT (a) Check the brake pedal height. Pedal height from Floor panel: 158.8 to 168.8 mm (6.25 to 6.46 in.) Text in Illustration ...

Installation

INSTALLATION PROCEDURE 1. INSTALL BRAKE PEDAL SUPPORT ASSEMBLY (a) Temporarily install the set bolt. (b) Install the hydraulic brake booster (See page ). (c) tighten the brake pedal support sub ...

Other materials about Toyota 4Runner:

Precaution
PRECAUTION 1. PRECAUTIONS WHEN WORKING ON ELECTRIC STEERING LOCK (a) After replacing the steering lock actuator assembly (steering lock ECU), perform key ID code registration. (b) After replacing the steering lock actuator assembly (steering lock ECU), ...

System Diagram
SYSTEM DIAGRAM 1. WIPER AND WASHER SYSTEM Communication Table Sender Receiver Signal Communication Method Main body ECU (Multiplex network body ECU) Multiplex network door ECU (Back do ...