Toyota 4Runner: Reassembly

Toyota 4Runner Service Manual / Brake / Brake System (other) / Brake Pedal(for Vacuum Brake Booster) / Reassembly

REASSEMBLY

PROCEDURE

1. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER

(a) Install a new stop light switch mounting adjuster to the brake pedal support assembly.

2. INSTALL BRAKE PEDAL PAD

(a) Install the brake pedal pad.

Adjustment

ADJUSTMENT PROCEDURE 1. CHECK BRAKE PEDAL HEIGHT (a) Check the brake pedal height. Pedal height from Floor panel: 158.8 to 168.8 mm (6.25 to 6.46 in.) Text in Illustration ...

Installation

INSTALLATION PROCEDURE 1. INSTALL BRAKE PEDAL SUPPORT ASSEMBLY (a) Temporarily install the set bolt. (b) Install the brake booster assembly (See page ). (c) Install the brake master cylinder su ...

Other materials about Toyota 4Runner:

VSC OFF Indicator Light does not Come ON
DESCRIPTION Refer to VSC OFF Indicator Light Remains ON (See page ). WIRING DIAGRAM Refer to VSC OFF Indicator Light Remains ON (See page ). CAUTION / NOTICE / HINT NOTICE: When replacing the master cylinder solenoid, perform calibration (See page ...

Removal
REMOVAL PROCEDURE 1. REMOVE JACK BOX HOLE COVER (a) Put protective around the jack box hole cover. (b) Using a moulding remover, Detach the 2 claws and 2 guides and remove the jack box hole cover. ...