Toyota 4Runner: Reassembly

Toyota 4Runner Service Manual / Drivetrain / Axle And Differential / Front Axle Hub(for 4wd) / Reassembly

REASSEMBLY

PROCEDURE

1. INSTALL FRONT AXLE HUB OIL SEAL LH

(a) Using SST and a press, press in a new oil seal.

SST: 09608-36010

SST: 09950-70010

09951-07100

NOTICE:

Do not damage the oil seal.

2. INSTALL FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY LH

(a) Using SST and a press, install a new bearing to the front axle hub.

SST: 09649-17010

Disassembly

DISASSEMBLY PROCEDURE 1. REMOVE FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY LH (a) Gently fix the front axle hub in a vise between aluminum plates. ...

Installation

INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. INSTALL FRONT AXLE HUB SUB ...

Other materials about Toyota 4Runner:

Precaution
PRECAUTION 1. KINETIC DYNAMIC SUSPENSION SYSTEM CAUTION: Be sure to check the pipe connections and whether or not any hydraulic circuit parts are damaged before performing work, as the hydraulic circuits become highly pressurized during air ...

Installation
INSTALLATION CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. INS ...