On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. REMOVE MAGNET CLUTCH RELAY
(a) Remove the magnet clutch relay from the engine room relay block. Text in Illustration
|
|
2. INSPECT MAGNET CLUTCH RELAY
(a) Measure the resistance of the according to the value(s) in the table below.
Standard Resistance:
Tester Connection |
Condition |
Specified Condition |
---|---|---|
3 - 5 |
Battery voltage not applied between terminals 1 and 2 |
10 kΩ or higher |
Battery voltage applied to terminal 1 and 2 |
Below 1 Ω |
3. INSTALL MAGNET CLUTCH RELAY
(a) Install the magnet clutch relay to the engine room relay block.
Tires
Replace or rotate tires in accordance with maintenance schedules and
treadwear.
Checking tires
1. New tread
2. Treadwear indicator
3. Worn tread
The location of treadwear indicators is shown by the “TWI” or “Δ” marks,
etc., molded on the ...
Installation
INSTALLATION
PROCEDURE
1. INSTALL POWER OUTLET SOCKET COVER
(a) Attach the 2 claws to install the socket cover.
2. INSTALL POWER OUTLET SOCKET ASSEMBLY
(a) Attach the claw to install the power outlet socket assembly.
3. INSTALL LOWER CENTER INSTRUMENT CL ...