Toyota 4Runner: Relay(for Window Defogger)

Toyota 4Runner Service Manual / Vehicle Exterior / Window / Glass / Relay(for Window Defogger)

On-vehicle Inspection

ON-VEHICLE INSPECTION

PROCEDURE

1. REMOVE DEFOGGER RELAY (DEF)

(a) Remove the defogger relay from the engine room relay block.

Text in Illustration

*1	Defogger relay

2. INSPECT DEFOGGER RELAY

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
3 - 5	Battery voltage is not applied to terminals 1 and 2	10 kΩ or higher
3 - 5	Battery voltage is applied to terminals 1 and 2	Below 1 Ω

If the result is not as specified, replace the defogger relay.

3. INSTALL DEFOGGER RELAY

(a) Install the defogger relay to the engine room relay block.

Rear Power Window Switch

Components COMPONENTS ILLUSTRATION Inspection INSPECTION PROCEDURE 1. INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (a) Measure the resistance according to the value(s) i ...

Relay(for Windshield Deicer)

On-vehicle Inspection ON-VEHICLE INSPECTION PROCEDURE 1. REMOVE DEICER RELAY (DEICER) (a) Remove the deicer relay from the engine room relay block. Text in Illustration ...

Other materials about Toyota 4Runner:

XM Tuner Malfunction (B15BA)
DESCRIPTION These DTCs are stored when a malfunction occurs in the stereo component tuner assembly. DTC Code DTC Detection Condition Trouble Area B15BA When either of the conditions below is met: ...

Precaution
PRECAUTION 1. IGNITION SWITCH EXPRESSION HINT: The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section. Expression Ign ...