DESCRIPTION
When the ignition switch is ON and the window lock switch is off, the multiplex network master switch sends remote up/down signals to each power window regulator motor via the LIN communication line.
PROCEDURE
1. |
CHECK LIN COMMUNICATION SYSTEM |
(a) Check for LIN communication system DTCs related to the power window control system (See page ).
OK:
LIN communication system DTCs are not output.
NG |
GO TO LIN COMMUNICATION SYSTEM |
|
2. |
CHECK MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY (WINDOW LOCK SWITCH) |
(a) Turn the window lock switch off and operate the switches on the multiplex network master switch. Check that the remote up/down function operates (See page ). OK: Remote up/down function operates. |
|
OK |
END |
NG |
REPLACE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY |
Reassembly
REASSEMBLY
PROCEDURE
1. INSTALL SHIFT LOCK CONTROL ECU SUB-ASSEMBLY
(a) Attach the 3 claws to install the shift lock control ECU to the transmission
floor shift.
(b) Connect the shift lock solenoid connector to the shift lock control ECU.
2. INSTALL IND ...
Operation Check
OPERATION CHECK
NOTICE:
Perform initialization before performing the operation check.
1. CHECK AUTO OPERATION
HINT:
When pressing the switch for 0.3 seconds or less, the roof glass moves but auto
operation does not operate.
(a) Turn the ignition switch ...