Toyota 4Runner: Removal
REMOVAL
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
PROCEDURE
1. REMOVE ROCKER PANEL MOULDING (w/ Intuitive Parking Assist System)
(See page .gif)
)
2. REMOVE STEP PLATE
(a) Using a 5 mm hexagon wrench, remove the 4 hexagon bolts and step plate.
3. REMOVE POWER LIFT STEP ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 4 bolts, 2 nuts and power lift step assembly.
Components
COMPONENTS
ILLUSTRATION
...
Disassembly
DISASSEMBLY
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
1. REMOVE STEP PLATE COVER LH
...
Other materials about Toyota 4Runner:
Fuel Sender Open Detected (B1500)
DESCRIPTION
This DTC is stored when the combination meter detects a fuel sender gauge malfunction.
DTC Code
DTC Detection Condition
Trouble Area
B1500
IG voltage is 9.5 V or higher and the followin ...
Diagnosis System
DIAGNOSIS SYSTEM
1. SYMPTOM SIMULATION
HINT:
The most difficult case in troubleshooting is when no problem symptoms occur.
In such a case, a thorough problem analysis must be carried out. A simulation of
the same or similar conditions and environment in ...
0.0072