Toyota 4Runner: Removal

Toyota 4Runner Service Manual / Vehicle Exterior / Exterior Panels / Trim / Rear Door Belt Moulding / Removal

REMOVAL

CAUTION / NOTICE / HINT

HINT:

Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.

PROCEDURE

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

2. REMOVE REAR DOOR INSIDE HANDLE BEZEL LH

3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

4. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP LH

5. REMOVE REAR DOOR SERVICE HOLE COVER LH

6. REMOVE REAR DOOR GLASS RUN LH

7. REMOVE REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY LH

8. REMOVE REAR DOOR QUARTER WINDOW GLASS LH

9. REMOVE REAR DOOR GLASS SUB-ASSEMBLY LH

10. REMOVE REAR DOOR BELT MOULDING LH

(a) Detach the 7 claws and remove the rear door belt moulding.

Text in Illustration

*1	Protective Tape

Components

COMPONENTS ILLUSTRATION ILLUSTRATION ...

Installation

INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. INSTALL REAR DOOR BELT MOU ...

Other materials about Toyota 4Runner:

Operating the lights and wipers
Headlight switch The headlights can be operated manually or automatically. Turning the end of the lever turns on the lights as follows: Type A 1. The daytime running lights turn on. 2. The side marker, parking, tail, license plate, daytime r ...

Using the steering wheel audio switches
Some audio features can be controlled using the switches on the steering wheel. Operation may differ depending on the type of audio system or navigation system. For details, refer to the manual provided with the audio system or navigation system. 1. ...