REMOVAL
CAUTION / NOTICE / HINT
HINT:
Standard:
Item |
Temperature |
---|---|
Vehicle Body |
40 to 60°C (104 to 140°F) |
Window Frame Moulding |
20 to 30°C (68 to 86°F) |
NOTICE:
Do not heat the vehicle body or window frame moulding excessively.
PROCEDURE
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).
2. REMOVE REAR DOOR INSIDE HANDLE BEZEL LH
3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
4. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP LH
5. REMOVE REAR DOOR SERVICE HOLE COVER LH
6. REMOVE REAR DOOR GLASS RUN LH
7. REMOVE REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY LH
8. REMOVE REAR DOOR QUARTER WINDOW GLASS LH
9. REMOVE REAR DOOR GLASS SUB-ASSEMBLY LH
10. REMOVE REAR DOOR BELT MOULDING LH
11. REMOVE REAR DOOR WEATHERSTRIP LH
(a) Detach the clip and remove the upper part of the rear door weatherstrip so that the moulding can be removed.
12. REMOVE REAR DOOR FRONT WINDOW FRAME MOULDING LH
(a) Remove the door window frame moulding clip.
(b) Detach the clip and remove the double-sided tape to remove the rear door front window frame moulding.
Precaution
PRECAUTION
1. IGNITION SWITCH EXPRESSION
HINT:
The type of ignition switch used on this model differs according to the specifications
of the vehicle. The expressions listed in the table below are used in this section.
Expression
Ign ...
Automatic running boards
The Automatic running boards are linked to the side door operations,
extending and retracting when a side door is opened and closed. When a door is
opened or closed, the board on the same side extends or retracts.
1. Opening a door: The appropriate boar ...