Toyota 4Runner: Removal

Toyota 4Runner Service Manual / Vehicle Exterior / Lighting (ext) / Fog Light Assembly / Removal

REMOVAL

CAUTION / NOTICE / HINT

HINT:

Use the same procedure for both the RH and LH sides.
The procedure listed below is for the LH side.

PROCEDURE

1. REMOVE FRONT BUMPER COVER (w/o Intuitive Parking Assist System)

(See page )

2. REMOVE FRONT BUMPER COVER (w/ Intuitive Parking Assist System)

(See page )

3. REMOVE FRONT BUMPER REINFORCEMENT STOPPER RH (w/o Intuitive Parking Assist System, for RH Side)

4. REMOVE FRONT BUMPER SIDE MOULDING SUB-ASSEMBLY LH (w/ Intuitive Parking Assist System)

5. REMOVE FOG LIGHT ASSEMBLY LH

(a) Remove the 2 screws.

(b) Detach the 2 guides to remove the fog light assembly LH.

Disassembly

DISASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedure for both the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. REMOVE FOG LIGHT BULB ...

Adjustment

ADJUSTMENT PROCEDURE 1. VEHICLE PREPARATION FOR FOG LIGHT AIM ADJUSTMENT (a) Prepare the vehicle: Make sure that the vehicle has no damage or deformation around the headlights. Fill ...

Other materials about Toyota 4Runner:

Reassembly
REASSEMBLY CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. HINT: A bolt without a torque specification is shown in the standard bolt chart (See page ). PROCEDURE 1. INSTALL REAR SEAT TRACK ADJU ...

On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT HOOD SUB-ASSEMBLY (a) Check that the clearance measurements of areas A through E are within each standard range. Standard: Area Measurement Area Measurement ...