Toyota 4Runner manuals

Toyota 4Runner: Removal

REMOVAL

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for both the RH and LH sides.
  • The procedure listed below is for the LH side.

PROCEDURE

1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH


2. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH


3. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


4. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP LH


5. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY LH

(a) Disconnect the connector.


(b) Detach the clamp to remove the 3 nuts.

(c) Detach the claw to remove the outer rear view mirror assembly LH.

Components
COMPONENTS ILLUSTRATION ILLUSTRATION ...

Disassembly
DISASSEMBLY CAUTION / NOTICE / HINT PROCEDURE 1. REMOVE OUTER MIRROR LH (a) Put protective tape around the outer mirror LH. (b) Using a moulding remover, detach the 2 claws of the oute ...

Other materials about Toyota 4Runner:

Removal
REMOVAL PROCEDURE 1. REMOVE FRONT BUMPER COVER (w/o Intuitive Parking Assist System) (See page ) 2. REMOVE FRONT BUMPER COVER (w/ Intuitive Parking Assist System) (See page ) 3. REMOVE HIGH PITCHED HORN ASSEMBLY 4. REMOVE RADIATOR GRILLE BRACKET ...

Steering Angle Sensor Communication Stop Mode
DESCRIPTION Detection Item Symptom Trouble Area Steering Angle Sensor Communication Stop Mode Either condition is met: "Spiral cable (Steering Angle Sensor)" is not displayed ...

© 2016-2024 | www.to4runner.net

0.0273