Toyota 4Runner: Removal

Toyota 4Runner Service Manual / Vehicle Exterior / Wiper / Washer / Rear Wiper Motor / Removal

REMOVAL

PROCEDURE

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

2. REMOVE REAR NO. 1 SPOILER COVER

3. REMOVE REAR SPOILER SUB-ASSEMBLY

4. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY

(a) Remove the nut and rear wiper blade assembly.

5. REMOVE REAR WIPER MOTOR AND BRACKET ASSEMBLY

(a) Disconnect the connector.

(b) Loosen the 3 bolts.

NOTICE:

Do not try to remove the bolts since they are integrated with the motor.

On-vehicle Inspection

ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT REAR WIPER MOTOR AND BRACKET ASSEMBLY (a) Operate the rear wiper motor and bracket assembly. (b) Stop the rear wiper motor and bracket assembly operation ...

Inspection

INSPECTION PROCEDURE 1. INSPECT REAR WIPER MOTOR AND BRACKET ASSEMBLY (a) Check the wiper intermittent operation. (1) Connect the positive (+) lead of the battery to terminal 5 (L) an ...

Other materials about Toyota 4Runner:

Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE COOLER BRACKET (a) Detach the clamp. (b) Remove the screw and cooler bracket. 2. REMOVE MAGNET CLUTCH ASSEMBLY (a) Clamp the cooler compressor in a vise. (b) Using SST, hold the magnet clutch hub. SST: 07112-76060 ( ...

Emission inspection and maintenance (I/M) programs
Some states have vehicle emission inspection programs which include OBD (On Board Diagnostics) checks. The OBD system monitors the operation of the emission control system. If the malfunction indicator lamp comes on The OBD system determines that a prob ...