Toyota 4Runner: Removal

Toyota 4Runner Service Manual / Vehicle Interior / Heating / Air Conditioning / Front Evaporator Temperature Sensor / Removal

REMOVAL

PROCEDURE

1. REMOVE AIR CONDITIONING UNIT

(a) Remove the air conditioning unit (See page ).

Disassembly

DISASSEMBLY PROCEDURE 1. REMOVE BLOWER ASSEMBLY (a) Remove the screw. (b) Detach the 2 claws and remove the blower unit assembly. 2. REMO ...

Inspection

INSPECTION PROCEDURE 1. INSPECT NO. 1 COOLER THERMISTOR (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Conne ...

Other materials about Toyota 4Runner:

Inspection
INSPECTION PROCEDURE 1. INSPECT REAR DIFFERENTIAL LOCK SLEEVE (a) Install the sleeve to the differential case (LH) and check that it moves smoothly. (b) Install the side gear to the sleeve and check that it moves smoothly. (c) Using a feele ...

Removal
REMOVAL PROCEDURE 1. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY 2. REMOVE REAR ENGINE UNDER COVER ASSEMBLY 3. REMOVE FRONT FENDER APRON SEAL RH 4. REMOVE FRONT NO. 1 FENDER APRON TO FRAME SEAL RH 5. REMOVE NO. 1 OIL COOLER INLET HOSE AND NO ...