REMOVAL
PROCEDURE
1. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
2. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
3. REMOVE FRONT NO. 1 CONSOLE BOX INSERT
4. REMOVE FRONT NO. 2 CONSOLE BOX INSERT
5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for VF2A)
7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
8. REMOVE NO. 2 CONSOLE BOX RETAINER
9. REMOVE REAR CONSOLE BOX ASSEMBLY
10. REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
(a) Disconnect the power outlet socket assembly connector.
(b) Using a screwdriver, detach the claw to remove the No. 1 power outlet socket assembly. Text in Illustration
HINT: Tape the screwdriver tip before use. |
|
11. REMOVE NO. 1 POWER OUTLET SOCKET COVER
(a) Detach the 2 claws to remove the No. 1 power outlet socket cover. |
|
12. REMOVE REAR CONSOLE END PANEL
13. REMOVE NO. 3 POWER OUTLET SOCKET ASSEMBLY
(a) Detach the connector clamp.
(b) While pulling the claw of the No. 3 power outlet socket assembly in the direction of the arrow, push the No. 3 power outlet socket assembly toward the inside of the chamber to remove it. HINT: Use the same procedure as for the other sides. |
|
14. REMOVE CENTER POWER OUTLET SOCKET COVER
(a) Detach the 2 claws to remove the center power outlet socket cover. HINT: Use the same procedure as for the other sides. |
|
Wireless remote control
The wireless remote control can be used to lock and unlock the vehicle.
Vehicles without a smart key system
1. Locks all the doors
2. Sounds the alarm (press and hold)
3. Unlocks all the doors Pressing the button unlocks the driver’s door. Pressing
...
Freeze Frame Data
FREEZE FRAME DATA
1. CHECK FREEZE FRAME DATA
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Navigation System / Trouble
Codes.
(e) Select a Troubl ...