Toyota 4Runner: Removal

Toyota 4Runner Service Manual / Vehicle Interior / Power Outlets (int) / Power Outlet Socket(for Front) / Removal

REMOVAL

PROCEDURE

1. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

2. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

3. REMOVE HEATER CONTROL ASSEMBLY

4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for VF2A)

6. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

7. REMOVE NO. 2 CONSOLE BOX RETAINER

8. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/ Climate Control Seat System)

9. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Climate Control Seat System)

10. REMOVE POWER OUTLET SOCKET ASSEMBLY

(a) Remove the power outlet socket assembly (w/ Climate Control Seat System).

(1) Using a screwdriver, detach the claw to remove the power outlet socket assembly.

Text in Illustration

*1	Protective Tape

HINT:

Tape the screwdriver tip before use.

(b) Remove the power outlet socket assembly (w/o Climate Control Seat System).

(1) Using a screwdriver, detach the claw to remove the power point socket assembly.

Text in Illustration

*1	Protective Tape

HINT:

Tape the screwdriver tip before use.

11. REMOVE POWER OUTLET SOCKET COVER

(a) Remove the power outlet socket cover (w/ Climate Control Seat System).

(1) Detach the 2 claws to remove the power outlet socket cover.

(b) Remove the power outlet socket cover (w/o Climate Control Seat System).

(1) Detach the 2 claws to remove the power outlet socket cover.

Components

COMPONENTS ILLUSTRATION ILLUSTRATION ...

Installation

INSTALLATION PROCEDURE 1. INSTALL POWER OUTLET SOCKET COVER (a) Attach the 2 claws to install the socket cover. 2. INSTALL POWER OUTLET SOCKET ASSEMBLY (a) Attach the claw to install the power ou ...

Other materials about Toyota 4Runner:

SRS airbag system components
1. Side airbags 2. “AIR BAG ON” and “AIR BAG OFF” indicator lights 3. Curtain shield airbags 4. Front passenger airbag 5. Knee airbags 6. Side and curtain shield airbag sensors 7. Seat belt pretensioners and force limiters 8. Front airba ...

Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE REAR BUMPER LOWER COVER (w/ Garnish) (a) Remove the 2 clips and 14 outside moulding retainers. (b) Detach the claw to remove the rear bumper lower cover 2. REMOVE REAR BU ...