Toyota 4Runner: Removal

Toyota 4Runner Service Manual / Vehicle Interior / Seat / Front Seat Assembly(for Manual Seat) / Removal

REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:

The procedure listed below is for the RH side.

PROCEDURE

1. PRECAUTION

CAUTION:

Be sure to read Precaution thoroughly before servicing (See page ).

If the side airbag was deployed, replace the separate type front seatback assembly with the necessary parts in accordance with the extent of the collision damage.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

3. REMOVE FRONT SEAT HEADREST ASSEMBLY

(a) Remove the front seat headrest assembly.

4. REMOVE FRONT SEAT INNER TRACK BRACKET COVER RH

(a) Operate the seat track adjusting handle to move the front seat assembly to the rearmost position.

(b) Using a moulding remover, detach the 2 claws.

(c) Move the front seat inner track bracket cover RH in the direction of the arrow to detach the 2 guides and remove the front seat inner track bracket cover RH.

5. REMOVE FRONT SEAT OUTER TRACK BRACKET COVER RH

(a) Using a moulding remover, detach the 2 claws.

(b) Move the front seat outer track bracket cover RH in the direction of the arrow to detach the 2 claws and guide and remove the front seat outer track bracket cover RH.

6. REMOVE INNER SEAT TRACK BRACKET COVER RH

(a) Operate the seat track adjusting handle to move the front seat assembly to the foremost position.

(b) Using a moulding remover, detach the 2 claws.

(c) Move the inner seat track bracket cover RH in the direction of the arrow to detach the 2 guides and remove the inner seat track bracket cover RH.

7. REMOVE OUTER SEAT TRACK COVER RH

(a) Using a moulding remover, detach the 2 claws.

(b) Move the outer seat track cover RH in the direction of the arrow to detach the 4 guides and remove the outer seat track cover RH.

8. REMOVE FRONT SEAT ASSEMBLY

(a) Remove the 2 bolts.

(b) Operate the seat track adjusting handle to move the front seat assembly to the rearmost position.

(d) Operate the seat track adjusting handle to move the front seat assembly to the center position, and operate the reclining adjuster release handle RH and move the seatback to the upright position.

(e) Disconnect the connectors under the seat.

(f) Remove the front seat assembly.

NOTICE:

Be careful not to damage the vehicle body.

Components

COMPONENTS ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ...

Installation

INSTALLATION CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. HINT: The procedure listed below is for the RH side. PROCEDURE 1. INSTALL F ...

Other materials about Toyota 4Runner:

Inspection
INSPECTION PROCEDURE 1. INSPECT FRONT SUSPENSION UPPER ARM ASSEMBLY LH (a) As shown in the illustration, flip the ball joint stud back and forth 5 times before installing the nut. (b) Using a torque ...

Components
COMPONENTS ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRA ...