REMOVAL
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
PROCEDURE
1. REMOVE FRONT SEAT ASSEMBLY
(a) Remove the front seat assembly (See page
).
2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
3. REMOVE RECLINING POWER SEAT SWITCH KNOB
4. REMOVE FRONT SEAT CUSHION SHIELD LH
5. REMOVE FRONT POWER SEAT SWITCH LH
(a) Remove the 3 screws.
(b) Disconnect the power seat switch connector and remove the switch.
On-vehicle Inspection
ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
1. CHECK CURTAIN SHIELD AIRBAG ASSEMBLY LH (VEHICLE NOT INVOLVED IN COLLISION)
...
Open in One Side of CAN Branch Line
DESCRIPTION
If 2 or more ECUs and/or sensors do not appear on the Techstream "CAN Bus Check"
screen, one side of the CAN branch wire may be open (one side of the CANH [branch
wire]/CANL [branch wire] of the ECU and/or sensor is open).
...