Toyota 4Runner: Removal

Toyota 4Runner Service Manual / Vehicle Interior / Seat Belt / Rear No. 1 Seat Inner Belt Assembly(for 60/40 Split Slide Walk-in Seat Type Lh Side) / Removal

REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE

1. REMOVE REAR SEAT ASSEMBLY LH

(a) Remove the rear seat assembly LH (See page ).

2. REMOVE REAR SEAT UPPER RECLINING COVER LH

3. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

4. REMOVE CENTER SEAT HINGE COVER RH

5. REMOVE REAR SEAT CUSHION MOULDING LH

6. REMOVE REAR SEATBACK LOCK STRIKER COVER LH

7. REMOVE SEAT CUSHION COVER WITH PAD

8. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

(a) Remove the bolt and inner belt and disconnect the 3 point type belt.

Installation

INSTALLATION CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. HINT: A bolt without a torque specification is shown in the standard bolt cha ...

Rear No. 1 Seat Inner Belt Assembly(for 60/40 Split Slide Walk-in Seat Type Rh Side)

Components COMPONENTS ILLUSTRATION Installation INSTALLATION CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. HINT: A bolt withou ...

Other materials about Toyota 4Runner:

CD Sound Skips
PROCEDURE 1. CHECK CD (a) Check that the CD is not deformed or cracked. OK: No deformation or cracks on the CD NG CD IS FAULTY ...

Locking the doors from the outside without a key
Move the inside lock button to the lock position. Close the door. Vehicles without a smart key system The door cannot be locked if either of the front doors is open and the key is in the engine switch. Vehicles with a smart key system The door can ...