REMOVAL
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
PROCEDURE
1. PRECAUTION
CAUTION:
2. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat Type RH Side)
(See page )
3. REMOVE FRONT SEAT ASSEMBLY (for Power Seat)
(See page )
4. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH (w/ Climate Control Seat System)
5. REMOVE FRONT SEATBACK BOARD CLIP (w/ Climate Control Seat System)
6. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Manual Seat)
(a) Remove the rubber band from the separate type front seat cushion spring assembly. Text in Illustration
|
|
(b) Detach the claw to disconnect the airbag connector. |
|
(c) Detach the 3 airbag wire harness clamps.
(d) Detach the fastening tape to disconnect the airbag wire harness.
Text in Illustration
*1 |
Fastening Tape |
(e) Remove the 3 hog rings. |
|
(f) Open the 2 fasteners and separate type front seatback cover. |
|
(g) Remove the nut, detach the 2 hooks to disconnect the seatback cover bracket from the separate type front seatback spring assembly. |
|
(h) Using a screwdriver, detach the 4 claws to remove the 2 front seat headrest supports. |
|
(i) Remove the separate type front seatback cover with pad from the separate type front seatback spring assembly.
7. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Power Seat)
(a) w/o Climate Control Seat System:
(1) Remove the rubber band from the separate type front seat cushion spring assembly. Text in Illustration
|
|
(2) Detach the claw to disconnect the airbag connector. |
|
(3) Detach the 3 airbag wire harness clamps.
(4) Detach the fastening tape to disconnect the airbag wire harness.
Text in Illustration
*1 |
Fastening Tape |
(5) Remove the 3 hog rings. |
|
(6) Open the 2 fasteners and separate type front seatback cover.
Text in Illustration
*A |
for Cloth Seat |
*B |
for Synthetic Leather Seat |
(7) Remove the nut and detach the 2 hooks to disconnect the seatback cover bracket from the separate type front seatback spring assembly. |
|
(8) Using a screwdriver, detach the 4 claws to remove the 2 front seat headrest supports. |
|
(9) Remove the separate type front seatback cover with pad from the separate type front seatback spring assembly.
(b) w/ Climate Control Seat System:
(1) Detach the claw to disconnect the airbag connector. |
|
(2) Detach the 3 airbag wire harness clamps.
(3) Detach the fastening tape to disconnect the airbag wire harness.
Text in Illustration
*1 |
Fastening Tape |
(4) Detach the 7 hooks. |
|
(5) Remove the 5 hog rings. |
|
(6) Remove the nut and detach the 2 hooks to disconnect the seatback cover bracket from the separate type front seatback spring assembly |
|
(7) Using a screwdriver, detach the 4 claws to remove the 2 front seat headrest supports. |
|
(8) Remove the separate type front seatback cover with pad from the separate type front seatback spring assembly.
8. REMOVE FRONT SEAT SIDE AIRBAG ASSEMBLY
(a) Detach the 2 clamps to disconnect the front seat side airbag wire harness. |
|
(b) Using an E10 "TORX" socket wrench, remove the 2 nuts and front seat side airbag assembly. CAUTION:
|
|
Relay
On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT DOME RELAY
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
Condition
...
Calibration
CALIBRATION
Initial Calibration of Compass:
The compass indicates the direction that the vehicle is heading by detecting
the direction and strength of the earth's magnetic field and processing this data
using the compass sensor and microcomputer. Det ...