Toyota 4Runner: Removal

Toyota 4Runner Service Manual / Vehicle Interior / Theft Deterrent / Keyless Entry / Engine Hood Courtesy Switch / Removal

REMOVAL

PROCEDURE

1. REMOVE FRONT BUMPER COVER (w/o Intuitive Parking Assist System)

(See page )

2. REMOVE FRONT BUMPER COVER (w/ Intuitive Parking Assist System)

(See page )

3. REMOVE HIGH PITCHED HORN ASSEMBLY

4. REMOVE RADIATOR GRILLE BRACKET

5. REMOVE LOW PITCHED HORN ASSEMBLY

6. REMOVE HOOD LOCK CONTROL CABLE COVER

(a) Remove the 2 screws.

(b) Detach the claw to remove the hood lock control cable cover.

7. REMOVE HOOD LOCK ASSEMBLY

(a) Remove the 3 bolts.

(b) Detach the clamp.

(d) Disconnect the hood lock control cable to remove the hood lock assembly.

Inspection

INSPECTION PROCEDURE 1. INSPECT HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH) (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester ...

Installation

INSTALLATION PROCEDURE 1. INSTALL HOOD LOCK ASSEMBLY (a) Apply MP grease to the sliding areas of the hood lock assembly. (b) Connect the hood lock control cable assembly. (c) Connect the connecto ...

Other materials about Toyota 4Runner:

Electrical Key Oscillator(for Front Floor)
Components COMPONENTS ILLUSTRATION Installation INSTALLATION PROCEDURE 1. INSTALL INDOOR NO. 1 ELECTRICAL KEY ANTENNA ASSEMBLY (a) Attach the clamp to install the indoor No. 1 electrical key antenna. ...

Antenna location and effective range
Antenna location 1. Antennas outside the cabin 2. Antennas inside the cabin 3. Antenna outside the luggage compartment Effective range (areas within which the electronic key is detected) When locking or unlocking the doors The system can be opera ...