REMOVAL
CAUTION / NOTICE / HINT
NOTICE:
HINT:
When pressure in the power supply system is released, the reaction force decreases and the stroke becomes longer.
PROCEDURE
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).
2. DRAIN BRAKE FLUID
NOTICE:
Wash off brake fluid immediately if it comes into contact with a painted surface.
3. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY
(a) Remove the lower No. 1 instrument panel airbag assembly (See page ).
4. REMOVE PUSH ROD PIN
(a) Remove the clip and push rod pin from the brake pedal lever.
5. REMOVE HYDRAULIC BRAKE BOOSTER ASSEMBLY
(a) Disconnect the 3 connectors from the hydraulic brake booster assembly. |
|
(b) Use tags or make a memo to identify the place to reconnect. HINT:
|
|
(c) Using a union nut wrench, disconnect the 4 brake lines from the hydraulic brake booster assembly. |
|
(d) Remove the 4 nuts and pull out the hydraulic brake booster assembly. |
|
6. REMOVE BRAKE BOOSTER GASKET
(a) Remove the brake booster gasket from the brake master cylinder.
USB Audio System Recognition/Play Error
DESCRIPTION
When a USB device or "iPod" is connected to the USB jack of the No. 1 stereo
jack adapter assembly, it must have playable files. The device must also communicate
with and be recognized by the navigation receiver assembly. This diagno ...
Communication Malfunction No. 1 (B2797)
DESCRIPTION
This DTC is stored when a communication error occurs between the transponder
key amplifier and transponder key ECU assembly. Some possible reasons for the communication
error are: 1) 2 or more ignition keys are positioned too close together, o ...