REMOVAL
PROCEDURE
1. DRAIN AUTOMATIC TRANSMISSION FLUID
2. REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY
3. REMOVE VALVE BODY OIL STRAINER ASSEMBLY
4. DISCONNECT TRANSMISSION WIRE
5. REMOVE TRANSMISSION VALVE BODY ASSEMBLY
(a) Remove the bolt, detent spring cover and detent spring.
(b) Remove the 19 bolts and valve body. |
|
(c) Remove the check ball body and spring. Text in Illustration
NOTICE: Do not drop the check ball body and spring. |
|
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for both the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH
(a) Attach the claw to install the ou ...
Entry Interior Alarm does not Sound
DESCRIPTION
The smart key system uses the combination meter buzzer to perform various vehicle
interior warnings. When the conditions of each warning are met, the certification
ECU sends a buzzer signal to the combination meter assembly, and the combinatio ...