REMOVAL
PROCEDURE
1. REMOVE REAR AXLE SHAFT RH
(a) Remove the rear axle shaft RH (See page
).
2. REMOVE REAR AXLE SHAFT LH
HINT:
Use the same procedure described for the RH side.
3. REMOVE PROPELLER SHAFT ASSEMBLY
(a) Remove the propeller shaft assembly (See page ).
4. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY
(a) Remove the 10 nuts and 10 washers, differential carrier.
NOTICE:
Be careful not to damage the contact surfaces.
5. REMOVE REAR DIFFERENTIAL CARRIER GASKET
Relay
On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable
is reconnected (See page ).
2. REMOVE WINDSHIELD WASHE ...
Removal
REMOVAL
PROCEDURE
1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH RH
(a) Detach the 2 clips and remove the front door lower frame bracket
garnish RH.
2. REMOVE DOOR NO. 2 INSIDE HANDLE BEZEL RH
...