REMOVAL
PROCEDURE
1. REMOVE PROPELLER SHAFT ASSEMBLY
(a) Place matchmarks on the propeller shaft flange and differential flange. Text in Illustration
|
|
(b) Remove the 4 nuts, 4 bolts and 4 washers.
(c) Remove the propeller shaft. |
|
(d) Insert SST into the transmission to prevent oil leakage.
SST: 09325-40010
Dtc Check / Clear
DTC CHECK / CLEAR
1. CHECK/CLEAR DTC (USING TECHSTREAM)
(a) Check DTC:
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Enter the following menus: Chassis / KDSS / Trouble Codes.
(5) Read DTCs b ...
Precaution
PRECAUTION
1. IGNITION SWITCH EXPRESSIONS
HINT:
The type of ignition switch used on this model differs according to the specifications
of the vehicle. The expressions listed in the table below are used in this section.
Expression
Ig ...