REMOVAL
PROCEDURE
1. REMOVE PROPELLER SHAFT ASSEMBLY
(a) Place matchmarks on the propeller shaft flange and transfer flange. Text in Illustration
|
|
(b) Remove the 4 nuts, 4 washers and propeller shaft assembly.
(c) Place matchmarks on the propeller shaft flange and differential flange. Text in Illustration
|
|
(d) Remove the 4 nuts, 4 bolts and 4 washers.
Reassembly
REASSEMBLY
PROCEDURE
1. INSTALL NO. 1 COOLER THERMISTOR
NOTICE:
If reusing the evaporator, do not insert the sensor into a location where the
sensor was previously inserted.
(a) Insert the sensor to a location that is 1 fin to the right or left of its ...
Sound Quality is Bad Only when Disc is Played (Volume is Too Low)
CAUTION / NOTICE / HINT
NOTICE:
After replacing the navigation receiver assembly of vehicles subscribed to pay-type
satellite radio broadcasts, XM radio ID registration is necessary.
PROCEDURE
1.
REPLACE DISC AND RECHECK
...