Toyota 4Runner: Removal

Toyota 4Runner Service Manual / Drivetrain / Vf2a Transfer / 4wd / Awd / Transfer Assembly / Removal

REMOVAL

PROCEDURE

1. DRAIN TRANSFER OIL

2. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY

(a) Remove the automatic transmission (See page ).

3. REMOVE TRANSFER ASSEMBLY

(a) Remove the 8 bolts.

(b) Remove the transfer from the transmission.

Components

COMPONENTS ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ...

Disassembly

DISASSEMBLY PROCEDURE 1. REMOVE TRANSFER INDICATOR SWITCH (4WD POSITION) 2. REMOVE TRANSFER INDICATOR SWITCH (L4 POSITION) 3. REMOVE TRANSFER INDICATOR SWITCH (NEUTRAL POSITION) 4. REMOV ...

Other materials about Toyota 4Runner:

Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. INSTALL POWER LIFT STEP ASSEMBLY (a) Install the power lift step assembly with the 2 ...

No Response from Steering Lock ECU (B2786)
DESCRIPTION This DTC is stored when LIN communication between the certification ECU and steering lock actuator assembly (steering lock ECU) stops for 10 seconds or more. DTC Code DTC Detection Condition Trouble Area ...