Toyota 4Runner manuals

Toyota 4Runner: Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory

Toyota 4Runner Service Manual / Audio / Visual / Telematics / Audio / Video / Audio And Visual System / Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory

CAUTION / NOTICE / HINT

NOTICE:

  • Some satellite radio broadcasts require payment. A contract must be made between a satellite radio company and the user. If the contract expires, it will not be possible to listen to the broadcast.

PROCEDURE

1.

CHECK SATELLITE RADIO

(a) Check radio condition.

Result

Proceed to

Broadcast cannot be selected

A

Broadcast can be selected, but selection can not be memorized

B


A

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

B

2.

CHECK SATELLITE RADIO

(a) Check the number of preset channels.

OK:

36 channels have already been preset.


OK

END (ONLY 36 CHANNELS CAN BE PRESET)

NG

3.

CHECK BATTERY

(a) Check if the battery was replaced.

OK:

Battery was not replaced.


OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

4.

ADD PRESET CHANNEL INTO MEMORY AGAIN

(a) Check if the preset channels that have been cleared can be added into memory again.

OK:

Preset channels can be added into memory.


OK

END


NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

Satellite Radio Broadcast cannot be Received
CAUTION / NOTICE / HINT NOTICE: Some satellite radio broadcasts require payment. A contract must be made between a satellite radio company and the user. If the contract expires, it w ...

Noise Occurs
PROCEDURE 1. NOISE CONDITION (a) Check from which direction the noise comes (front left or right, or rear left or right). OK: The location of the noise source ca ...

Other materials about Toyota 4Runner:

Removal
REMOVAL PROCEDURE 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system (See page ). NOTICE: When disconnecting the cable, s ...

Inside rear view mirror
Glare from the headlights of vehicles behind can be reduced by using the following functions: Manual anti-glare inside rear view mirror 1. Normal position 2. Anti-glare position Auto anti-glare inside rear view mirror In automatic mode, sensors are u ...

© 2016-2024 | www.to4runner.net

0.0248