Toyota 4Runner manuals

Toyota 4Runner: SD Card Communication Malfunction (B158C)

DESCRIPTION

The navigation receiver assembly stores this DTC when the SD card cannot be mounted when inserted into the SD card slot.

DTC No.

DTC Detection Condition

Trouble Area

B158C

The SD card cannot be mounted when inserted into the SD card slot.

  • SD card
  • Navigation receiver assembly

CAUTION / NOTICE / HINT

NOTICE:

After replacing the navigation receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, registration of the XM radio ID is necessary.

PROCEDURE

1.

CHECK SD CARD

(a) Turn the ignition switch off and remove the SD card from the SD card slot.

Model

Proceed to

The SD card is not damaged.

A

The SD card is damaged.

B


B

REPLACE SD CARD

A

2.

CLEAN SD CARD

(a) Check that the terminals of the SD card are free of foreign matter. Remove foreign matter as necessary.

(b) Check that the SD card slot of the navigation receiver assembly is free of foreign matter. Remove foreign matter as necessary.

(c) Insert the SD card into the SD card slot.

NEXT

3.

CHECK DTC

(a) Clear the DTCs (See page ).


(b) Recheck for DTCs and check if the same DTC are output again.

OK:

No DTCs are output.


OK

END

NG

4.

REPLACE SD CARD

(a) Replace the SD card.

(b) Clear the DTCs (See page ).


(c) Recheck for DTCs and check if the same DTC are output again.

OK:

No DTCs are output.


OK

END


NG

REPLACE NAVIGATION RECEIVER ASSEMBLY

USB Media Malfunction (B1585)
DESCRIPTION This DTC is stored when a malfunction occurs in a connected device. DTC No. DTC Detection Condition Trouble Area B1585 When o ...

AV Signal Stoppage (Low Battery Voltage) (B158F)
DESCRIPTION This DTC is stored when a video or audio signal is interrupted due to battery voltage input to the navigation receiver assembly dropping temporarily. DTC No. DTC ...

Other materials about Toyota 4Runner:

Inspection
INSPECTION PROCEDURE 1. INSPECT BRAKE BOOSTER PUMP ASSEMBLY (a) Apply battery voltage to the brake booster pump cables, and check the operation of the pump motor. OK:: Measurement Condition Specified C ...

Removal
REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for both the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH 2. REMOVE NO. 2 DOOR INSIDE HANDL ...

© 2016-2024 | www.to4runner.net

0.0073