Toyota 4Runner: Seat
- Climate Control Seat Switch
- Climate Control Seat System
- Front Power Seat Control System(w/ Memory)
- Front Power Seat Control System(w/o Memory)
- Front Seat Assembly(for Manual Seat)
- Front Seat Assembly(for Power Seat)
- Front Seat Cushion Heater
- Front Seatback Heater
- Lumbar Switch
- Power Seat Switch
- Rear No. 1 Seat Assembly(for 60/40 Split Double-folding Seat Type Lh Side)
- Rear No. 1 Seat Assembly(for 60/40 Split Double-folding Seat Type Rh Side)
- Rear No. 1 Seat Assembly(for 60/40 Split Slide Walk-in Seat Type Lh Side)
- Rear No. 1 Seat Assembly(for 60/40 Split Slide Walk-in Seat Type Rh Side)
- Rear No. 2 Seat Assembly
- Seat Heater Control
- Seat Heater Switch
- Seat Heater System
- Seat Memory Switch
Installation
INSTALLATION
PROCEDURE
1. INSTALL VOLTAGE INVERTER ASSEMBLY
(a) Install the voltage inverter with the 3 bolts.
Torque:
7.5 N·m {76 kgf·cm, 66 in·lbf}
(b) Connect the 2 connectors.
2. INSTAL ...
Other materials about Toyota 4Runner:
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
A bolt without a torque specification is shown in the standard bolt
chart (See page ).
PROC ...
ECM Communication Circuit Malfunction (C1203)
DESCRIPTION
The circuit is used to send control information from the skid control ECU to
the ECM, and engine control information from the ECM to the skid control ECU via
the CAN communication system.
DTC Code
DTC Detection Condition ...
© 2016-2024 | www.to4runner.net
0.0078
0.0078