Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH
2. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH
3. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
4. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP LH
5. REMOVE SEAT MEMORY SWITCH
(a) Disconnect the connector. |
|
(b) Remove the 2 screws.
(c) Detach the 4 claws to remove the seat memory switch.
Inspection
INSPECTION
PROCEDURE
1. INSPECT SEAT MEMORY SWITCH
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection |
Switch Condition |
Specified Condition |
---|---|---|
3 (M1) - 1 (E) |
1 switch pressed |
Below 1 Ω |
4 (M2) - 1 (E) |
2 switch pressed |
|
2 (MRY) - 1 (E) |
SET switch pressed |
If the result is not as specified, replace the seat memory switch.
Text in Illustration
*1 |
SET Switch |
*2 |
1 Switch |
*3 |
2 Switch |
*a |
Component without harness connected (Seat Memory Switch) |
Installation
INSTALLATION
PROCEDURE
1. INSTALL SEAT MEMORY SWITCH
(a) Attach the 4 claws to install the seat memory switch.
(b) Install the 2 screws.
(c) Connect the connector.
2. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP LH
3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
4. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH
5. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH
Front Seat Inner Belt Assembly
Components
COMPONENTS
ILLUSTRATION
ILLUSTRATION
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
1. INSTALL FRON ...
HD Radio Tuner Malfunction (B1551,B158D,B15A0,B15B0,B15B3,B15B4,B15B7)
DESCRIPTION
These DTCs are stored when a malfunction occurs in the radio and display receiver
assembly.
DTC No.
DTC Detection Condition
Trouble Area
B1551
When one of the conditions below is met: ...