Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
2. REMOVE SECURITY INDICATOR LIGHT ASSEMBLY
(a) Pull the security indicator light assembly to detach the 4 claws on the backside of the security indicator light assembly. |
|
(b) Disconnect the connector to remove the security indicator light assembly.
Inspection
INSPECTION
PROCEDURE
1. INSPECT SECURITY INDICATOR LIGHT ASSEMBLY
(a) Apply battery voltage between the terminals of the security indicator light assembly, and check that the security indicator light illuminates. OK:
If the result is not as specified, replace the security indicator light assembly. |
|
Motor LH Current Senser (62,63)
DESCRIPTION
When the side auto step motor current detection sensor inside the side auto step
controller ECU assembly detects a current of less than 1 A when the automatic running
board is operating, the side auto step controller ECU assembly does not oper ...
Lost Communication with "Seat Control Module A" (U0208)
DESCRIPTION
DTC Code
DTC Detection Condition
Trouble Area
U0208
There is no communication from the front power seat switch LH.
Power source or inside front power seat switch LH ...