Toyota 4Runner manuals

Toyota 4Runner: Selecting modes


Press the “ON/OFF” switch.

All the mode indicators will come on and then go off except the indicator for the present mode. The applicable road conditions will be displayed on the accessory meter.


Turn the dial to select the desired mode.

The indicator of the selected mode will come on and the applicable road conditions will be displayed on the accessory meter.

If the mode indicator flashes, Multi-terrain Select cannot be operated. Follow the instructions displayed on the accessory meter and check that the mode indicator stops flashing.

Multi-terrain Select
The Multi-terrain Select system has 4 terrain modes. When a terrain mode is selected in accordance with terrain conditions, engine power and active traction control system is controlled to enhance ...

Messages displayed on the accessory meter
Depending on switch operation, one of the following messages may appear on the accessory meter to provide guidance on transfer mode selection etc: Multi-terrain Select is temporarily canceled w ...

Other materials about Toyota 4Runner:

Precaution
PRECAUTION 1. EXPRESSIONS OF IGNITION SWITCH The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section. Expression Ignit ...

Precaution
PRECAUTION 1. PRECAUTIONS WHEN WORKING ON ELECTRIC STEERING LOCK (a) After replacing the steering lock actuator assembly (steering lock ECU), perform key ID code registration. (b) After replacing the steering lock actuator assembly (steering lock ECU), ...

© 2016-2024 | www.to4runner.net

0.0116