Toyota 4Runner manuals

Toyota 4Runner: Slip Indicator Light does not Come ON

DESCRIPTION

Refer to Slip Indicator Light Remains ON (See page ).


WIRING DIAGRAM

Refer to Slip Indicator Light Remains ON (See page ).


CAUTION / NOTICE / HINT

NOTICE:

When replacing the master cylinder solenoid, perform calibration (See page ).


PROCEDURE

1.

READ VALUE USING TECHSTREAM (SLIP INDICATOR LIGHT)



A

REPLACE MASTER CYLINDER SOLENOID


B

GO TO METER / GAUGE SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)

VSC OFF Indicator Light Remains ON
DESCRIPTION Operation of the VSC OFF switch changes the vehicle between normal mode, TRAC OFF mode*1 (AUTO LSD mode*2) and VSC OFF mode. During normal mode, pressing the VSC OFF switch for a shor ...

Slip Indicator Light Remains ON
DESCRIPTION The slip indicator light blinks during VSC, TRAC, crawl control, multi-terrain select control or trailer sway control operation. When the system fails, the slip indicator light comes ...

Other materials about Toyota 4Runner:

Air Conditioning Compressor Magnetic Clutch Circuit
DESCRIPTION When the air conditioning amplifier assembly is turned on, a magnet clutch assembly signal is sent from the MGC terminal of the air conditioning amplifier assembly. Then, the A/C COMP relay turns on to operate the magnet clutch assembly. WIRI ...

Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART If a trouble code is output during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below. When the SRS warning light remains on and the ...

© 2016-2024 | www.to4runner.net

0.0138