Toyota 4Runner: Sound Quality is Bad Only when CD is Played (Volume is Too Low)

Toyota 4Runner Service Manual / Audio / Visual / Telematics / Audio / Video / Audio And Visual System / Sound Quality is Bad Only when CD is Played (Volume is Too Low)

PROCEDURE

1.	REPLACE CD AND RECHECK

(a) Replace the CD with a known good one and check that the malfunction disappears.

OK:

Malfunction disappears.

END

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

No Sound can be Heard from Speakers

PROCEDURE 1. CHECK AUDIO SETTINGS (a) Set volume, fader and balance to the initial values and check that sound is normal. OK: Audio system returns to normal. HI ...

CD cannot be Ejected

PROCEDURE 1. CHECK OPERATION (a) Press the disc eject switch of the radio and display receiver assembly for 5 seconds or more and check that the CD is ejected. OK: ...

Other materials about Toyota 4Runner:

Installation
INSTALLATION PROCEDURE 1. INSTALL BRAKE PEDAL SUPPORT ASSEMBLY (a) Temporarily install the set bolt. (b) Install the hydraulic brake booster (See page ). (c) tighten the brake pedal support sub-assembly with the 4 nuts. Torque: 14 N·m {145 kgf·cm, ...

TC and CG Terminal Circuit
DESCRIPTION DTC output mode is set by connecting terminals TC and CG of the DLC3. WIRING DIAGRAM HINT: When each warning light continues blinking, a ground short in the wiring of terminal TC of the DLC3 or an internal ground short in each ECU is suspec ...