Toyota 4Runner: Steering

Power Source / Network

Suspension

Other materials about Toyota 4Runner:

Installation
INSTALLATION PROCEDURE 1. INSTALL SLIDING ROOF HOUSING SUB-ASSEMBLY (a) Temporarily install the housing with the 8 bolts (vehicle body side) and 8 nuts. (b) Tighten the 8 nuts in alphabetical order. Torque: 5.5 N·m {56 kgf·cm, 49 in·lbf} (c) Tight ...

Removal
REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. REMOVE FRONT WHEEL 2. DRAIN BRAKE FLUID NOTICE: Wash off the brake fluid immediately if ...