Toyota 4Runner: Steering Column

Installation

INSTALLATION PROCEDURE 1. INSTALL VANE PUMP ASSEMBLY (a) Install the vane pump with the 2 bolts. Torque: 43 N·m {438 kgf·cm, 32 ft·lbf} (b) Install the wire harness bracket with the bolt. T ...

Steering Column Assembly

...

Other materials about Toyota 4Runner:

Inspection
INSPECTION PROCEDURE 1. INSPECT FRONT PROPELLER SHAFT ASSEMBLY (a) Using a dial indicator, check the propeller shaft runout. Maximum runout: 0.3 mm (0.0118 in.) If the shaft runout is more than the maximum, replace the propeller shaft. ...

Terminals Of Ecu
TERMINALS OF ECU 1. REAR TELEVISION CAMERA ASSEMBLY (a) Disconnect the Y2 rear television camera assembly connector. (b) Measure the voltage according to the value(s) in the table below. Terminal No. (Symbol) Wiring Color ...