Toyota 4Runner: Stereo Component Amplifier Malfunction (B15A3)

Toyota 4Runner Service Manual / Audio / Visual / Telematics / Navigation / Multi Info Display / Navigation System / Stereo Component Amplifier Malfunction (B15A3)

DESCRIPTION

This DTC is stored when a malfunction occurs in the stereo component amplifier assembly.

DTC No.	DTC Detection Condition	Trouble Area
B15A3	When one of the conditions below is met: Internal power supply malfunction DSP error EEPROM error	Stereo component amplifier assembly

PROCEDURE

CHECK DTC

(a) Clear the DTCs (See page ).

(b) Recheck for DTCs and check if the same DTC are output again.

OK:

No DTCs are output.

USE SIMULATION METHOD TO CHECK

REPLACE STEREO COMPONENT AMPLIFIER ASSEMBLY

AV Signal Stoppage (Low Battery Voltage) (B158F)

DESCRIPTION This DTC is stored when a video or audio signal is interrupted due to battery voltage input to the navigation receiver assembly dropping temporarily. DTC No. DTC ...

XM Tuner Malfunction (B15BA)

DESCRIPTION These DTCs are stored when a malfunction occurs in the stereo component tuner assembly. DTC Code DTC Detection Condition Trouble Area ...

Other materials about Toyota 4Runner:

Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE FRONT UNIVERSAL JOINT SPIDER BEARING HINT: Use the same procedure for all front propeller shaft universal joint spider bearing. (a) Place matchmarks on the flange yoke and sleeve yoke. Text in Illustration ...

Ejecting CDs
Ejecting a CD (type A and B) Press and remove the CD. Ejecting a CD (type C) To select the CD to be ejected, press ( ) or ( ). The selected CD number is shown on the display. Press and remove the CD. Ejecting all the CDs (type C only) Press ...