Toyota 4Runner: System Description

Toyota 4Runner Service Manual / Audio / Visual / Telematics / Park Assist / Monitoring / Intuitive Parking Assist System / System Description

SYSTEM DESCRIPTION

1. GENERAL

(a) When the ultrasonic sensors detect any obstacles at the corners and rear of the vehicle, the system informs the driver of the distance between the sensors and the obstacles by sounding a buzzer.

2. FUNCTION OF COMPONENTS

Components	Function
Clearance warning ECU assembly	Receives signals from the ultrasonic sensors. Based on the received wave, the clearance warning ECU assembly calculates the approximate distance between the vehicle and obstacle, and sends a buzzer signal to the No. 1 clearance warning buzzer.
Back sonar or clearance sonar switch assembly	Supplies electrical power to the sensors and outputs system on/off signals to the clearance warning ECU assembly.
Ultrasonic sensor	The ultrasonic sensor sends and receives ultrasonic waves.
Combination Meter Assembly (Multi-information Display)	Transmits vehicle speed signal to clearance warning ECU assembly. Displays location of obstacle and approximate distance between vehicle and obstacle. Informs driver if ultrasonic sensors malfunction, or if they freeze or become dirty.
No. 1 clearance warning buzzer	Sounds to inform the driver of the distance to the obstacle.
Park/neutral position switch assembly	Sends a signal that activates the intuitive parking assist system when the shift lever is moved to R.

3. OPERATION EXPLANATION

(a) The clearance warning ECU assembly determines whether the intuitive parking assist system should be operated based on the clearance sonar switch on/off status and the shift position and the vehicle speed.

(b) When the system operates, the ECU transmits ultrasonic waves from the ultrasonic sensors. If these waves encounter an obstacle within the range of one or more of the sensors, the waves are reflected back to the sensors, which transmit them to the ECU. Based on this information, the ECU sends signals to the combination meter assembly and the clearance warning buzzer. The approximate distance between the vehicle and the obstacle is then indicated, and the buzzer sounds.

HINT:

Refer to "Operation Check" for the detailed operation (See page ).

System Diagram

SYSTEM DIAGRAM ...

How To Proceed With Troubleshooting

CAUTION / NOTICE / HINT HINT: Use the following procedures to troubleshoot the intuitive parking assist system. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP ...

Other materials about Toyota 4Runner:

Removal
REMOVAL PROCEDURE 1. REMOVE SIDE STEP ASSEMBLY LH 2. REMOVE STABILIZER CONTROL VALVE PROTECTOR 3. DRAIN SUSPENSION FLUID 4. REMOVE REAR STABILIZER LOWER BRACKET (a) Remove the 4 bolts and 2 rear stabilizer lower brackets. ...

Washer Fluid Level Warning Switch Circuit
DESCRIPTION When the volume of washer fluid decreases to below a certain level (when the level warning switch is turned on), the multi-information display in the combination meter assembly displays "LOW WASHER FLUID" to warn the driver. WIRING ...