TERMINALS OF ECU
1. CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY
(a) Disconnect the F42 air conditioning amplifier connector.
(b) Measure the voltage and resistance according to the value(s) in the table below.
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
---|---|---|---|---|
F42-21 (B) - F42-14 (GND) |
V - W-B |
Battery power source |
Always |
11 to 14 V |
F42-1 (IG+) - F42-14 (GND) |
L - W-B |
Ignition power supply |
Ignition switch ON |
11 to 14 V |
F42-1 (IG+) - F42-14 (GND) |
L - W-B |
Ignition power supply |
Ignition switch off |
Below 1 V |
F42-14 (GND) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
(c) Reconnect the F42 air conditioning amplifier connectors.
(d) Measure the voltage and resistance according to the value(s) in the table below.
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
---|---|---|---|---|
F42-40 (FDEF) - Body ground |
LG - Body ground |
Windshield deicer relay operation signal |
Ignition switch ON, outer mirror heater switch off |
11 to 14 V |
F42-40 (FDEF) - Body ground |
LG - Body ground |
Windshield deicer relay operation signal |
Ignition switch ON, outer mirror heater switch on |
Below 1 V |
F87-11 (FDF1) - Body ground |
P - Body ground |
Outer mirror heater switch indicator signal output |
Ignition switch ON, outer mirror heater switch off |
11 to 14 V |
F87-11 (FDF1) - Body ground |
P - Body ground |
Outer mirror heater switch indicator signal output |
Ignition switch ON, outer mirror heater switch on |
Below 1 V |
F87-5 (SW 1) - Body ground |
R - Body ground |
Outer mirror heater switch signal input |
Ignition switch ON, outer mirror heater switch off |
Below 1 V |
F87-5 (SW 1) - Body ground |
R - Body ground |
Outer mirror heater switch signal input |
Ignition switch ON, outer mirror heater switch on |
11 to 14 V |
Meter Illumination does not Dim at Night
DESCRIPTION
If the dimmer switch is turned to TAIL, HEAD or AUTO, the main body ECU sends
a TAIL relay signal, panel light illumination signal, panel relay signal and TAIL
cancel OFF signal to the combination meter. Then the meter and accessory meter beco ...
TRAC OFF Indicator Light Remains ON
DESCRIPTION
The skid control ECU is connected to the combination meter via the CAN communication
system. Pressing the VSC OFF switch turns off traction control and pressing and
holding this switch turns off traction control and VSC. If TRAC control turns ...