TERMINALS OF ECU
1. ACCESSORY METER ASSEMBLY
(a) Measure the voltage and resistance according to the value(s) in the table below.
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
---|---|---|---|---|
G36-1 (B) - Body ground |
L - Body ground |
Battery |
Always |
11 to 14 V |
G36-2 (ACC) - Body ground |
P - Body ground |
Ignition switch signal |
Ignition switch off |
Below 1 V |
Ignition switch ACC |
11 to 14 V |
|||
G36-3 (ILL+) - Body ground |
G - Body ground |
Illumination signal |
Light control switch in tail or head position |
11 to 14 V |
G36-7 (E) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
GPS Antenna Connection Malfunction(short) (B15C0,B15C1)
DESCRIPTION
These DTCs are stored when a malfunction occurs in the navigation antenna assembly.
DTC No.
DTC Detection Condition
Trouble Area
B15C0
Navigation antenna error
Nav ...
Taillight Relay Circuit
DESCRIPTION
This is the power source circuit of the clearance warning ECU assembly.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
Inspect the fuses for circuits related to this system before performing the following
inspection procedure.
PROCEDURE
...