Toyota 4Runner: Theft Deterrent System Presence Detection (B279C)

Toyota 4Runner Service Manual / Vehicle Interior / Theft Deterrent / Keyless Entry / Engine Immobiliser System(w/ Smart Key System) / Theft Deterrent System Presence Detection (B279C)

DESCRIPTION

If an ECM that is incompatible with the engine immobiliser system is installed, the ECM stores this DTC.

DTC Code	DTC Detection Condition	Trouble Area
B279C	An ECM that is incompatible with the engine immobiliser system is installed.	ECM

PROCEDURE

1.	REPLACE CURRENT ECM WITH PROPER ECM

(a) Replace the current ECM with the proper ECM (See page ).

END

Theft Deterrent System Communication Line High Fixation (B279A)

DESCRIPTION If the communication line (EFIO-IMI) to the ID code box is stuck on HI output, the ECM stores this DTC. DTC Code DTC Detection Condition Trouble Area ...

Short to GND in Immobiliser System Power Source Circuit (B278A)

DESCRIPTION This DTC is stored when the engine switch power source supply line is open or shorted. DTC Code DTC Detection Condition Trouble Area B ...

Other materials about Toyota 4Runner:

System Diagram
SYSTEM DIAGRAM 1. for 9 speakers: 2. for 8 speakers: ...

Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE FRONT NO. 1 LOWER ARM BUSH LH (a) Using a chisel and hammer, pry the flange of the bush outward. (b) Using SST and a press, press out the bush. SST: 09632-36 ...